November 06, 2010
In this lab you will use almost every routing protocol Cisco offers for TCP/IP and should take even advanced engineers several hours. Good Luck.
Continue reading “Free Cisco Lab Scenario Expert Redistribution” »
November 06, 2010
Overview:
In this lab you will see one of the problems that can sometimes appear on networks with multiple routers doing redistribution
Configure the routers to match the diagram in the left margin labeled topology. You will be using the range of class C addresses between 204.1.2.0-204.1.8. Never use a static route at any time on the routers to achieve the solution.
Keep a diagram of your network including all network addresses and routing domains.
Continue reading “Free Cisco Lab Scenario Advanced Redistribution” »
November 06, 2010
Overview:
In this lab you will learn how to configure basic TCP/IP redistribution between three routing protocols, RIP, IGRP and OSPF. You should be familiar with configuring these routing protocols before you begin this lab.
Configure the routers to match the diagram in the left margin labeled topology. Use the network address specified on the diagram. Never use static routing at any time to complete this lab.
Keep diagrams of your network including all network addresses and the routing domains for each routing protocol?
Continue reading “Free cisco Lab Scenario Basic Redistribution” »
October 23, 2010
Cisco Lab Scenario-1 Basic Router Setup
Posted by: admin : Category: IGRP
In this exercise we will configure the routers in the lab with the basic setup parameters and verify their connectivity. Finally we will save the completed configuration so that we can use in future labs.
You can configure this lab using the Dynamips lab described in the previous article Basic Practice Labs Introduction, or actual hardware you have access to.
Subscribe to this site and send me an email at support@freeciscolab.com requesting access, and I will send you everything you will need to complete this lab as well as all the up and coming labs at no cost that’s right FREE. But you must register and send me a request in order to be eligible for this offer. You will also receive a complete solution to the previous weeks exercise including configuration file each week by email.
Continue reading “Cisco Lab Scenario-1 Basic Router Setup” »
