Free GNS3 Lab Advanced MPLS VPN

Posted by: admin  :  Category: BGP, CCIE, CCNP, GNS3 Dynamips, OSPF


This lab is based on a lab I found on one of the forums, and in this lab we will use GNS3 to create an advanced lab consisting of 12 inter connected Cisco 3640 IOS based routers. We will use this lab to gain a better understanding of how to configure MPLS VPNs. In addition to these technologies we will review basic router configuration along with some other technologies such as OSPF, BGP, NAT, IPSEC and GRE. Continue reading “Free GNS3 Lab Advanced MPLS VPN” »

Free GNS3 Lab Basic MPLS Configuration

Posted by: admin  :  Category: BGP, CCIE, CCNP, GNS3 Dynamips, Routing


This free GNS3 lab is an effort to provide a better understanding of Multiprotocol Label Switching (MPLS) and how to configure it on Cisco IOS routers.

Continue reading “Free GNS3 Lab Basic MPLS Configuration” »

ASA Stateful LAN Based Failover Lab For GNS3

Posted by: admin  :  Category: GNS3 Dynamips, Lab Scenarios, Routing, Security


The objective of this free Cisco GNS3 lab is to demonstrate how to configure LAN-Based active/active failover and to distribute loads between two ISPs using the Cisco ASA 5520. The GNS3 network file and a detailed network diagram have been provided for this lab but you will need to supply the final configuration.

Continue reading “ASA Stateful LAN Based Failover Lab For GNS3” »

Free GNS3 Policy Based Routing Lab

Posted by: admin  :  Category: CCIE, CCNP, EIGRP, GNS3 Dynamips, Routing


In this Free Cisco Lab we will use GNS3 to build a network scenario to help you understand and configure Policy Based Routing (PBR). This lab can be completed using real hardware but unfortunately due to the limited support for split horizons Cisco Packet Tracer cannot be used.

Continue reading “Free GNS3 Policy Based Routing Lab” » Site Meter