Free Cisco Multiuser Packet Tracer VoIP Lab
Voice over IP (VoIP) has become a very important part of the network engineer’s job in today’s new IT department. Cisco has added a new certification to their CCNA program (CCNA Voice) to prepare new Cisco engineers for this exciting technology. This lab is an effort to help instructors create a multiuser classroom environment without the need for expensive hardware using Cisco’s Packet tracer. Students can configure and demonstrate the basic operation of this technology within their own simulated lab pod on their computer, then expand the lab to include connecting their pod a simulated WAN and configure dialing peers to communicate with other student pods.
[adsense_id=”5″]
In This lab students using their individual Packet Tracer pod will learn to configure Voice and Data VLANs over the same network. They will be configuring VTP, VLAN Trunking and separate VLAN to support the Voice and Data traffic. They will configure a router to supply DHCP address for both the Voice and the Data VLANs, as well as a router on a stick to route the traffic. They will then configure Telephony Services to provide configuration for all the IP phone devices. After which they will verify the configuration of both the Voice and Data devices and insure that they all communicate properly. Finally they will connect their pod to a simulated WAN environment and configure dialing peers to communicate with other student pods.
Search for Additional Cisco CCIE Labs: [adsense_id=”6″]
Multiuser-VoIP (6,619 hits)
November 21st, 2012 at 6:57 am
Can anyone provide the configuration file/script/diagram for this scenario?
August 3rd, 2013 at 9:20 am
Hello, can someonepls let me know what version os packet tracer this lab works with as I cannot open the lab in version 5.3 or 5.2
thanks
August 3rd, 2013 at 11:19 am
All of the labs on this site are presently using Packet Tracer Version 5.3.3