Free CCIE 8 Hour Challenge LAB-3

Posted by: admin  :  Category: ATM, CCIE, Routing

Has your head exploded yet are you ready for another head buster lab scenario, well this lab should provide you with some new challenge it has just about everything Frame-Relay, ISDN, ATM, EIGRP, OSPF, and BGP of course. If you can complete this lab within the 8.5 hours allowed for, you just might be ready for the real thing.

This lab will require real hardware due to the ISDN and ATM requirements. It also has basic VoIP using analog phones and FXS ports. If you want to spice it up try configuring the VoIP with IP Phones. You may also try modifying it for GNS3, but as some of the command needed to complete this head buster such as BGP, HSRP and DLSW+ are not supported in Cisco’s Packet Tracer so I was unable to create a Packet Tracer activity to accompany this scenario.


The final solution configuration files have been included for all devices so that you can check your solution against recommended solution. But don’t cheat yourself try completing the lab on your own before reviewing the solution configuration files.

Good luck and have fun.

Search for Additional Cisco CCIE Labs: [adsense_id=”6″]

  CCIE Day Lab3 (3,146 hits)

Also check out these assume training resources:

Leave a Reply

What is 5 + 11 ?
Please leave these two fields as-is:
IMPORTANT! To be able to proceed, you need to solve the following simple math (so we know that you are a human) :-)

* Site Meter