Placed

100 mg sildenafil

Free CCIE 8 Hour Challange LAB

Posted by: admin  :  Category: CCIE, GNS3 Dynamips




Are you ready for a head buster lab scenario, well this lab should provide you with all the challenge of a real CCIE lab exam. If you can complete this lab within the 8.5 hours allowed for, you may be ready for the real thing

This lab will require real hardware or GNS3 at the very least as some of the command needed to complete this head buster such as BGP, HSRP and DLSW+ are not supported in Cisco’s Packet Tracer so I was unable to create a Packet Tracer activity to accompany this scenario.

[adsense_id=”5″]

The final solution configuration files have been included for all devices so that you can check your solution against recommended solution. But don’t cheat yourself try completing the lab on your own before reviewing the solution configuration files.

Good luck and have fun.

Search for Additional Cisco CCIE Labs: [adsense_id=”6″]

  CCIE Day Lab1 (1,605 hits)

Also check out these assume training resources:


One Response to “Free CCIE 8 Hour Challange LAB”

  1. Gabor Says:

    Hello,

    great work! Where can I find the physical topology/cabling?

    regards,
    Gabor

Leave a Reply

What is 8 + 3 ?
Please leave these two fields as-is:
IMPORTANT! To be able to proceed, you need to solve the following simple math (so we know that you are a human) :-)

*

http://s51.sitemeter.com/meter.asp?site=s51ciscolab Site Meter