Placed

100 mg sildenafil

Free Cisco Lab GNS3 Scenario CCNP Final Assessment

Posted by: admin  :  Category: BGP, CCNP, EIGRP, IGRP, OSPF

This lab scenario will test your knowledge of all aspects of the CCNP Routing certification. And will require a broad perspective and knowledge base. Continue reading “Free Cisco Lab GNS3 Scenario CCNP Final Assessment” »

Free Cisco Lab GNS3 Scenario CCNA Final Assessment

Posted by: admin  :  Category: CCNA, EIGRP, GNS3 Dynamips, IGRP, Labs With Solutions, RIP

This lab scenario will test your knowledge of all aspects of the CCNA certification. You will configure a network with IP and IPX across Frame Relay, ISDN, Ethernet, Token Ring, and point to point connections. You will also configure and redistribute RIP, IGRP and EIGRP routing protocols.

Continue reading “Free Cisco Lab GNS3 Scenario CCNA Final Assessment” »

Free Cisco Lab GNS3 Scenario OSPF Over Frame Relay

Posted by: admin  :  Category: CCNP, GNS3 Dynamips, OSPF, Routing

In this lab you will configure OSPF over frame relay. This is an intermediate level lab designed for CCNP students. The lab is not complete yet but the diagram should provide most of the information needed to practices OSPF over frame relay. I have included the GNS3 configuration file and the DLCI’s have been configured in the frame relay switch.

Continue reading “Free Cisco Lab GNS3 Scenario OSPF Over Frame Relay” »

Free Cisco Lab GNS3 Scenario Lab1

Posted by: admin  :  Category: CCIE, CCNP, EIGRP, GNS3 Dynamips, IGRP, OSPF, RIP

This Free Cisco Lab Scenario is directed to CCNP and CCIE students of intermediate level. In this lab you will configure and redistribute RIP, IGRP, EIGRP and OSPF in multiple areas. Although there are Token Ring connections they may be substituted for Ethernet if unavailable. This lab should take about eight hours to complete.

Continue reading “Free Cisco Lab GNS3 Scenario Lab1” »

http://s51.sitemeter.com/meter.asp?site=s51ciscolab Site Meter